Rechargeable Phone Cards - How to Recharge Minutes
Recharge minutes on our website is super easy: Just order the same
card again as you did before.
|Check the requirments in the following for recharge a pin
1. Dial an access number;
2. Follow the voice prompt and enter your PIN (If DirecDial is already set up, go to the next step);
3. After you are prompted for the destination number, simply press "92#"
4. Enter the PIN number that you would like to transfer the balance from and followed by the "#" key;
5. Then follow the prompts to confirm the transfer.
Requirements Both the Balance Transfer "From" and "To" PIN numbers must be active & valid.
Both the Balance Transfer "From" and "To" PIN numbers should not have expired.
Both the Balance Transfer "From" and "To" PIN numbers must have the same rate table.
Both the Balance Transfer "From" and "To" PIN numbers should not be "in-use" at the moment of transfer.
Upon completion of the transfer, the expiration date of Transfer "From" PIN will be extended for additional 6 months.
The Transfer "From" PIN must have NO first use.
The Balance Transfer "From" and "To" PIN number should not be the same.
You can also check the Pinless setup for this BBS Pinless phone card.
Depends on the phone card you purchased before, when you order the same card again, you
The same PIN# as you used before. Our system automatically
identifies your account by using your email address, then recharges your
minutes automatically. Basically you do not need to do anything after the order
A new phone card PIN whose value is transferrable. You just need to
follow our instructions to transfer the value from the new PIN# to your old
PIN# then you keep the old PIN# forever.
A new phone card PIN but its value is not transferrable. Basically it is
not a rechargeable phone card then you will use a new PIN# every time you place
a new order.
Please check our customer support system
for the frequently asked questions on how to recharge minutes.
For information about Pinless calling, please
check Pinless Calling Setup.